/products/51197b7875bc04044f139f863c80a1ed G60-12A 12V 智能铅酸蓄电池充电器,电动车充电器,汽车电瓶充电器–产品–深圳谷润充电器生产厂家 - 注册自动送198元彩金,68彩票送彩金

注册自动送198元彩金,68彩票送彩金

注册自动送198元彩金,68彩票送彩金

G60-12A 12V 智能铅酸蓄电池充电器,电动车充电器,汽车电瓶充电器

  • 规格参数
  • 输入: 100~240V
  • 输出: 13.8V 3.3A
  • 充电过程: 智能四段式 ,可修复久置硫化失效电池
  • 充电指示: 特有电池电量状态显示,25%-100%
  • 输出保护: 短路保护、输出反接保护
  • 安全认证: CE cUL
  • 尺寸大小: 120 x 67 x 41mm
  • 适用电池范围: 12V 4~40Ah 铅酸蓄电池
G60-12A 12V 智能铅酸蓄电池充电器,电动车充电器,汽车电瓶充电器
详细描述
G60-12A is a main member of digital-chargers from Green Digital Power-tech Co., Ltd. It represents today's new technology for lead-acid type battery charging. G60-12A programmed four auto stages (Ud-Im-Uo-Up) charging process, It is designed for all kinds of 12V 7~80Ah lead-acid battery, such as SLA, AGM and Gel battery.  Stage "Ud" desulfurating the battery through 18V pulse,When the battery recovered, stage "Im" will give bulk current charging( 3.3A or 2.0A). Then, "Uo" stage is followed, the output voltage is limited on 14.7V; When the battery is nearly full, stage"Up" will turn on duty.  At this stage, the battery is charged completely and the charger give some pulse to maintenance the battery.
Further, G60 can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, G60 will inter protection mode when the battery polarity reversed or the output connectors shorted. 
 
Specification for G60-12A

Input Voltage

100-240VAC50-60Hz

Input Current

1.1A

Back current drain

1.3mA

Charge voltage

Rating 12V, Bulk  limited voltage : 14.7V

Ripple current

Current-ripple:<= 0.13A rms

Bulk charge current

3.3A for G60-12A2.0A for G60-12AS

Operate Temperature

-20~50

Cooling

Natural convection. Do not cover the charger.

Charge principle

Auto 4 stages: Ud-I-Uo-Up

Battery type

All types of 12V lead-acid batteries.( SLA, Gel, AGM….)

Battery capacity

7-80Ah for G60-12A, 4~40Ah for G60-12AS

Size

120X67X41mm

Enclosure

IP54 (Dust protected, Water splashing resistance)

Weight

270g

 
 
How to use:
1. Connect the AC cord to the socket, The "power" lamp will light on RED. 
2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, all lamps will flashing, please check the setup.
3. Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
 
The table shows the duration of the Bulk stepup to about 80% state of charge. 

Battery typeAh

G60-12Ahours

G60-12AS (hours)

12

3

5

22

7

10

45

14

20

75

22

Not recommend

 
 
返回
顶部